NAFFCO Electric

CONCEPT When high voltage working Insulators are contaminated from the environment deposits such as sand, dirt, dust, salt, industrial smoke, cement, etc., it causes leakage of electric current with risk of flashover and thus consequent loss of supply. The best and only solution is to wash these insulators. TECHNOLOGY With the CPSE (Constant Pressure and Separate Engine) system the normal tap water at high pressure is atomized and cleans the surface. The equipment fully complies with new edition of IEEE-957 / 2005 and provides compliance to IEC 61472 with minimum approach distances. State-of-art safety Technology implemented to prevent Flashover

“NAFFCO HAS BEEN MANUFACTURING HYDRAULIC INSULATED AERIAL PLATFORMS FOR MANY YEARS FOR LOWER HEIGHTS. NOW DEVELOPED HIGHER RANGE WITH FOAM-FILLED BOOM AS PER ANSI & IEC STANDARDS” CONCEPT Bare hands or potential working involves placing the technician in direct electrical contact with an energized overhead line. The technician will work alongside the lines from fully insulated platform. The technician works at the same potential (voltage) as of the line. (Equipotential condition with hot line that prevents flow of current through operator.) Equipment is dielectric tested at the best world laboratory. TECHNOLOGY “Foam Filled” Technology utilized in NAFFCO insulator booms is unique and integral to the performance of the latest state of the art booms. NAFFCO foam filled technology: epoxide-resin reinforced by glass fiber tube filled by high density polyurethane foam (closed particles).Completely complying with ANSI & IEC 1057 and succeeded to fulfil all types of tests as per ANSI & IEC 1057 specially: Test of penetration for humidity of the foam filled boom. Mechanical test for fatigue. (All electrical tests are carried out after fatigue test.) IEC 1057 Type Test up to 1,250,000V.